Cold Rolled 0.5mm Thick Carbon Steel Plate Sheet Coil for Construction
- Overview
- Recommended Products
- Steel strapping with HDPE edge protectors to prevent coil edge damage
- VCI (Volatile Corrosion Inhibitor) film wrapping for ocean freight protection
- Waterproof kraft paper outer layer
- Wooden pallets or steel saddles for container loading
- Moisture-absorbent desiccants included for tropical destinations
Product Overview
Specifications
| Product Name | Cold Rolled 0.5mm Thick Carbon Steel Plate Sheet Coil for Construction |
| Thickness | 0.5mm (±0.02mm tolerance) |
| Width | 1000mm / 1219mm / 1250mm standard; custom slitting from 600mm to 1500mm |
| Steel Grades | SPCC (JIS G3141), DC01 (EN 10130), Q195/Q235 (GB/T 700), ST12 |
| Coil Inner Diameter | 508mm or 610mm |
| Coil Weight | 5–12 metric tons per coil |
| Surface Finish | Bright annealed (BA), matte, oiled or unoiled per customer requirement |
| Edge Condition | Mill edge or slit edge |
| Standards Compliance | JIS G3141, EN 10130, ASTM A1008, GB/T 5213 |
| Tensile Strength | 270–410 MPa |
| Yield Strength | 180–280 MPa |
| Elongation | 28–38% (depending on grade and annealing condition) |
Quality Assurance
Each shipment is accompanied by a Mill Test Certificate (MTC) detailing chemical composition, mechanical property test results, and dimensional verification data.
Manufactured in an ISO 9001:2015-certified facility.
In-line laser thickness measurement and automated surface defect detection.
Flatness testing to ensure that both warpage and transverse warpage of the coils remain within industry standards.
Optional third-party inspections conducted by SGS, BV, or TÜV Rheinland.
Packaging & Logistics
FAQ
Q: What is the actual weight per square meter of a 0.5-millimeter steel plate?
A: The theoretical weight is approximately 3.925 kilograms per square meter. A standard coil measuring 0.5 millimeters by 1,250 millimeters and weighing 8 metric tons contains approximately 2,040 square meters of flat steel.
Q: Which steel grade should I choose—SPCC, DC01, or Q195?
A: For general construction applications, including roofing, exterior walls, and ductwork, the performance of these three steel grades is comparable. If an export project requires formal mill certification, or if the steel is to be coated with high-performance paint, we recommend selecting SPCC (JIS standard) or DC01 (European standard). For galvanized corrugated sheets and basic structural applications with lower certification requirements, Q195 (Chinese GB standard) offers excellent value for money. If a project specifies EN or JIS standards, please select DC01 or SPCC, respectively.
Q: What is your company’s minimum order quantity?
A: The standard minimum order quantity (MOQ) for export orders is 1 metric ton per specification. However, we understand that new customers may wish to place a small trial order first. For trial orders, we can provide samples and adjust the price accordingly.
Q: How can I get your quotation as soon as possible?
A:Please contact:
Email:[email protected]
WeChat/WhatsApp/Mobile: +8613512028034
